Z10005 0.96 inch 80*160 SPI TFT LCD Display IPS Panel for Arduino ESP32 Raspberry Pi

Number of Pixels

80 * RGB * 160

Pixel

LCM Outline Dimension

13.5 (W) * 27.95 (H) * 1.55 (T)

mm

LCD Outline Dimension

13.2 (W) * 26.99 (H) * 0.4 (T)

mm

Active Area

10.8 * 21.696

mm

Pixel Pitch

0.0135 *0.1356

mm

Display Mode

Normally Black

Pixel Arrangement

RGB Vertical stripe

Viewing Direction

ALL

Color Configuration

RGB

LCD Transmittance

Typ: 4.89%; Min: 4.4%

LCD Contrast Ratio

Typ: 800; Min: 640

FPC Version

Z10003-P12 V1

Interface

4 LINE SPI

Operating Temperature

-20℃ ~ 70℃

Storage Temperature

-30℃ ~ 80℃

Backlight Arrangement

1 LED

Luminance

-

Weight

-

1

GND

Ground

2

LED-K

POWER SUPPLY- FOR BACKLIGHT CATHODE

3

LED-A

POWER SUPPLY+ FOR BACKLIGHT ANODE

4

VCC(3.3V)

Power Supply for Analog, VCC 3.3V.

5

GND

Ground

6

GND

Ground

7

D/C

Display data/command selection pin in 4-line serial interface.

8

CS

Chip selection pin; Low enable, High disable.

9

SCL

This pin is used to be serial interface clock.

10

SDA

SPI interface input/output pin. The data is latched on the rising edge of the SCL signal.

11

RESET(3.3V)

This signal will reset the device and it must be applied to properly initialize the chip. Signal is active low.

12

GND

Ground